Results 1 to 21 of 21

Thread: xeBuild GUI 2.091 - 16537 GUI Nand Builder for Jtag / RGH Xbox 360 Consoles

  1. #1
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default xeBuild GUI 2.091 - 16537 GUI Nand Builder for Jtag / RGH Xbox 360 Consoles

    xeBuild GUI is a Frontend / GUI for xeBuild, making it easy for you to select most options that you might need to build a new nand for your Jtag / RGH hacked Xbox 360. Such options include Motherboard type, SMC hack for Freeboot, image type and so on.

    You can also dump your existing nand and xeBuild is able to check what SMC hack you have previously used for JTAG, it's also able to tell you what SMC version you have, and if it's a JTAG, Clean/Retail, Glitch or Cygnos patched SMC.

    So basically to sum up you can easily update your Jtag / RGH in three easy steps wth XeBuild GUI

    1. Open your existing nand
    2. Enter the CPU key
    3. Build the nand

    As seen below:



    Download:

    Download XeBuild GUI 2.091 - Builds 16537 Nand
    Attached Thumbnails Attached Thumbnails -xebuild-gui.jpg  

    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  2. #2

    Default

    thats all you mean only by this i can updaye to 15574
    then where 15574 dash files
    please make short tut based on this apps to update jtag


  3. #3

    Default

    The data for the 15574 Dash is included, build your image and enjoy.

    Obviously to restore the avatars / kinect data you run the official system update AFTER updating to 15574.

  4. Thanks from:



  5. #4

    Default

    Quote Originally Posted by MasterChief View Post
    The data for the 15574 Dash is included, build your image and enjoy.

    Obviously to restore the avatars / kinect data you run the official system update AFTER updating to 15574.
    Has anyone else lost 5.1 digital audio after doing this update? I updated to 15574, then had to use Dashlaunch and a renamed $$ystemupdate folder to restore the kinect data. Since then, I get startup sound, but no sound after that unless I switch to digital stereo. Not sure if the 5.1 audio disappeared after the 15574 update, or after the systemupdate.

  6. #5
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Updated with the latest XeBuild GUI 2.085 that builds 16197 nands.

    Note: I have merged the various XeBuild GUI threads we had, the latest will always be posted in this thread.

    Download:

    Download XeBuild GUI 2.085 - Builds 16197 Nand
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  7. Thanks from:


  8. #6

    Default

    im having problem getting this to get my avatar update. any help. keeps saying error downloading


  9. #7
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    The avatar update for the 16197 dash can be found here
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  10. #8
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Updated with the latest XeBuild GUI 2.09 that builds 16203 nands.

    Download XeBuild GUI 2.09 - Builds 16203 Nand
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  11. #9

    Default

    what should i select under build type and motherboard
    my console jtag 14699 dash jasper 512


  12. #10
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Select your existing nand as the source and it should fill in the settings for you.

    If not Freeboot (Jtag) and Jasper 512.
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  13. Thanks from:


  14. #11

    Default

    I've successfully updated to 16203, however I can't install $systemupdate. I've downloaded it with xeBuild, no success. Then I tried with the official M$ update but when I insert my usb key, the update doesn't load. Yes, it's formatted in FAT32 and it's in the root directory as $systemupdate. The USB port is functioning since it's the same drive I used to upgrade the dash. Any idea why?

  15. #12
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Try calling it $$Systemupdate and see if that works. You probably have dashlaunch installed which blocks system updates by default.
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  16. #13

    Default

    i build 16203 nand with xebuild 2.09 but when try to write it using flash 360
    the flash 360 say that (your current nand is not zero piard)
    please help

  17. #14
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Thats normal for Flash 360, I would however use Nand Flasher 360 instead.
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  18. Thanks from:


  19. #15

    Default

    i update just now with nand flasher to 16203
    need help to restore avatar

  20. #16
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Download the official update here: http://digiex.net/downloads/download...d-avatars.html

    You might have to name it $ystemupdate on the USB drive if you have dashlaunch installed.
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  21. Thanks from:


  22. #17

    Default

    i name it $Systemupdate no update appear
    then name it $$Systemupdate and nothing happen
    i try boot more than 6 times with that two names with fat32 usb stick
    is there another method

  23. #18
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Try $$ystemUpdate, i always forget which it is.
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  24. #19

    Default

    i try that and no message of update appear

  25. #20

    Default

    I've problem with my JTAG update with severall xebuilt apps.
    error:
    xeBuild v1.07.632
    ---------------------------------------------------------------
    base path changed to C:\Users\Gebruiker\Desktop\2091\files
    ---- { Image Build Mode } ----
    building jtag image

    ***** WARNING: nanddump.bin has a bad LBA at block 0x1df (raw offset 0x3dbf000), block LBA ignored


    **** could not read smc_config.bin (-1) ****

    ******* ERROR: critical bootloader files are missing, cannot proceed!



    ***** FATAL BUILD ERROR: -1 unable to complete NAND image

    ---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
    ---------------------------------------------------------------
    xeBuild ERROR: image build error
    ERROR: There was one or more fatal errors: 1 errors during the build process
    Cleaning data and temporary directories... Done!

    also tried Jrunner ..the same problem.

  26. #21
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,435
    Blog Entries
    11

    Default

    Updated to XeBuild GUI 2.091 which builds the 16537 Nand
    XB1: Launch console - 500gb internal drive
    360: Jasper - 1tb drive - jtag hacked running the 16547 dashboard
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If I helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

Similar Threads

  1. Replies: 221
    Last Post: 19-09-13, 08:33

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Digiex is a technology and gaming forum, founded in 2004 by InsaneNutter and Nimrod. Digiex has served the internet community with breaking news, detailed guides, exclusive downloads and a popular discussion forum. A small, friendly community of like minded people has developed over the years. People are encouraged to register and participate in on-going discussions.
Join us