I am running HDDHackr v1.25 on my laptop. I have only the harddrive I want to flash connected to it and booting from a usb with hddhackr and the bin file on it. I boot from usb with legacy usb enabled under bios i type in hddhackr and I get this everytime The drive I am using is a laptop sata 7 pin Help please
look in the bios there might be a ahci option or sata...change that and it should work if not then you need to use a different computer
There was no option relating to ahci or sata on my bios... I attempted to use my friends laptop and it was successful. New 120g harddrive The problem was my laptop, oh well
I am having an issue with v1.30; I am able to get to the point where hddhackr needs to flash the firmware. Sectors 16-22 are rewritten successfully, but after that a red message reading "Can't save drive firmware for later restore! DRQ Error: 0x0816" always appears. Any help would be appreciated...I picked up a 4GB xbox slim w/kinect from newegg for $100 off via gift card, and I used the credit to purchase a WD Scorpio Blue BEVT drive.
i am having same as mdubb1387 but i don't get DRQ but i do get this Can't save drive firmware hddhackr 1.40 hitachi 320 hd