xeBuild GUI 2.098 - 17511 GUI Nand Builder for Jtag / RGH Xbox 360 Consoles

Discussion in 'Libxenon Homebrew / Jtag & Reset Glitch Content' started by InsaneNutter, Feb 21, 2012.

  1. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    xeBuild GUI is a Frontend / GUI for xeBuild, making it easy for you to select most options that you might need to build a new nand for your Jtag / RGH hacked Xbox 360. Such options include Motherboard type, SMC hack for Freeboot, image type and so on.

    You can also dump your existing nand and xeBuild is able to check what SMC hack you have previously used for JTAG, it's also able to tell you what SMC version you have, and if it's a JTAG, Clean/Retail, Glitch or Cygnos patched SMC.

    So basically to sum up you can easily update your Jtag / RGH in three easy steps wth XeBuild GUI

    1. Open your existing nand
    2. Enter the CPU key
    3. Build the nand

    As seen below:

    [​IMG]

    Download:

    Download XeBuild GUI 2.098 - Builds 17511 Nand
     

    Attached Files:

  2. acad222

    acad222 Elite Member

    Joined:
    Mar 29, 2011
    Messages:
    86
    Likes Received:
    0
    thats all you mean only by this i can updaye to 15574
    then where 15574 dash files
    please make short tut based on this apps to update jtag
     
  3. MasterChief

    MasterChief Addict

    Joined:
    Sep 17, 2009
    Messages:
    748
    Likes Received:
    88
    Location:
    The Internet
    The data for the 15574 Dash is included, build your image and enjoy.

    Obviously to restore the avatars / kinect data you run the official system update AFTER updating to 15574.
     
    acad222 likes this.
  4. Dadtheimpaler

    Dadtheimpaler New Member

    Joined:
    Oct 10, 2012
    Messages:
    1
    Likes Received:
    0
    Has anyone else lost 5.1 digital audio after doing this update? I updated to 15574, then had to use Dashlaunch and a renamed $$ystemupdate folder to restore the kinect data. Since then, I get startup sound, but no sound after that unless I switch to digital stereo. Not sure if the 5.1 audio disappeared after the 15574 update, or after the systemupdate.
     
  5. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    Updated with the latest XeBuild GUI 2.085 that builds 16197 nands.

    Note: I have merged the various XeBuild GUI threads we had, the latest will always be posted in this thread.

    Download:

    Download XeBuild GUI 2.085 - Builds 16197 Nand
     
    Michael_T likes this.
  6. gingeee85

    gingeee85 Member

    Joined:
    Feb 9, 2010
    Messages:
    8
    Likes Received:
    0
    im having problem getting this to get my avatar update. any help. keeps saying error downloading
     
  7. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    The avatar update for the 16197 dash can be found here
     
  8. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
  9. acad222

    acad222 Elite Member

    Joined:
    Mar 29, 2011
    Messages:
    86
    Likes Received:
    0
    what should i select under build type and motherboard
    my console jtag 14699 dash jasper 512
     
  10. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    Select your existing nand as the source and it should fill in the settings for you.

    If not Freeboot (Jtag) and Jasper 512.
     
    acad222 likes this.
  11. NickD25

    NickD25 New Member

    Joined:
    Apr 9, 2013
    Messages:
    1
    Likes Received:
    0
    I've successfully updated to 16203, however I can't install $systemupdate. I've downloaded it with xeBuild, no success. Then I tried with the official M$ update but when I insert my usb key, the update doesn't load. Yes, it's formatted in FAT32 and it's in the root directory as $systemupdate. The USB port is functioning since it's the same drive I used to upgrade the dash. Any idea why?
     
  12. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    Try calling it $$Systemupdate and see if that works. You probably have dashlaunch installed which blocks system updates by default.
     
  13. acad222

    acad222 Elite Member

    Joined:
    Mar 29, 2011
    Messages:
    86
    Likes Received:
    0
    i build 16203 nand with xebuild 2.09 but when try to write it using flash 360
    the flash 360 say that (your current nand is not zero piard)
    please help
     
  14. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    acad222 likes this.
  15. acad222

    acad222 Elite Member

    Joined:
    Mar 29, 2011
    Messages:
    86
    Likes Received:
    0
    i update just now with nand flasher to 16203
    need help to restore avatar
     
  16. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    acad222 likes this.
  17. acad222

    acad222 Elite Member

    Joined:
    Mar 29, 2011
    Messages:
    86
    Likes Received:
    0
    i name it $Systemupdate no update appear
    then name it $$Systemupdate and nothing happen
    i try boot more than 6 times with that two names with fat32 usb stick
    is there another method
     
  18. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    10,523
    Likes Received:
    2,781
    Location:
    Yorkshire, England
    Try $$ystemUpdate, i always forget which it is.
     
  19. acad222

    acad222 Elite Member

    Joined:
    Mar 29, 2011
    Messages:
    86
    Likes Received:
    0
    i try that and no message of update appear
     
  20. sansie

    sansie Member

    Joined:
    Oct 22, 2013
    Messages:
    14
    Likes Received:
    0
    I've problem with my JTAG update with severall xebuilt apps.
    error:
    xeBuild v1.07.632
    ---------------------------------------------------------------
    base path changed to C:\Users\Gebruiker\Desktop\2091\files
    ---- { Image Build Mode } ----
    building jtag image

    ***** WARNING: nanddump.bin has a bad LBA at block 0x1df (raw offset 0x3dbf000), block LBA ignored


    **** could not read smc_config.bin (-1) ****

    ******* ERROR: critical bootloader files are missing, cannot proceed!



    ***** FATAL BUILD ERROR: -1 unable to complete NAND image

    ---------------------------------------------------------------
    xeBuild Finished. Have a nice day.
    ---------------------------------------------------------------
    xeBuild ERROR: image build error
    ERROR: There was one or more fatal errors: 1 errors during the build process
    Cleaning data and temporary directories... Done!

    also tried Jrunner ..the same problem.
     

Share This Page