Page 1 of 3 123 LastLast
Results 1 to 40 of 103

Thread: Upgrade a Jtagged Xbox 360's hard drive, restore the avatars and Xbox 1 emulator

  1. #1
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default Upgrade a Jtagged Xbox 360's hard drive, restore the avatars and Xbox 1 emulator

    If you have an Xbox 360 console that has been Jtag hacked I'm sure you will be aware that a lot of the security restrictions that are present on stock Xbox 360's are removed, one of these restrictions is the hard drive size limit. A Jtagged console can use any 2.5" SATA hard drive, the make, model and size do not matter.

    This guide will show you how to:
    • Upgrade the hard drive to any size 2.5" SATA hard drive
    • Setup the correct partitions
    • Restore the Xbox 1 emulator
    • Restore the avatars
    Ok lets begin, the first thing you will need to do is purchase a hard drive, any 2.5" SATA hard drive will work fine so feel free to buy which ever hard drive you desire. I purchased a 1TB Western Digital Scoprio Blue drive (WD10TPVT) at Ebuyer.com



    Unlike upgrading the hard drive on a console that is not Jtagged no hacking with Hddhackr is required, we are now going to remove the old drive from the 360's hard drive enclosure and swap it with the drive you wish to upgrade to.

    Opening the 360 drive enclosure

    You will need a Torx T6 screwdriver to do this.



    You can now remove the top, the mechanism to lock/unlock the HDD-bay on your Xbox 360 console might fall outÖ donít worry itís easy enough its put back together, just look how it is in my photo below.

    Now you have 4 more screws to remove, these require a Torx T10 screwdriver, you can then remove the metal case.



    Now you can unplug the power and sata cable from the drive, then slide it out pulling the drive gentily up as you do so.



    Now you want to insert the new drive in to the 360 caddy / enclosure, depending on the size of the 2.5" drive you might need to snap the 4 prongs off the 360's drive enclosure as seen in the photo below.

    9.5 mm drives will fit in the enclosure without having the prongs snapped off, however the slightly larger 12.5 mm drives will require them to be removed.
    To remove simply bend them and they should snap off with ease, the enclosure will still re assemble fine without them don't worry.



    After you have re assembled the enclosure connect the drive to your console, power it up and go to the memory management screen.

    All been well you should have an unformatted hard drive show up, if your Jtagged console is Jasper with 256 or 512mb of internal storage be sure you format the actual hard drive and not the internal storage, you can tell them apart by the icon, as seen in the photo below.



    Highlight the new drive, press Y to go in to device options and format the drive. You will be asked to enter your consoles serial number.

    The new drive formatted:



    Now we are going to restore the backwards compatibility partition, to make this as easy as possible for beginners I have created a CD with the applications and files you will need to do this.

    You can download an image of this cd here: harddrive.iso
    If you are unsure on how to burn CD images have a look at Digiex's guide on How to burn BIN, CUE, DI, DVD, GI, IMG, ISO, MDS, NRG and PDI images to disc. (Remember to unzip the ISO!)

    When the disc has burned put it in your 360, it will be read as a Mixed Media Disc, go to the Game Library and you should see XEX Menu 1.1, load it up. (Select exit if you are asked to sign a profile in)



    When XEX menu has loaded press the right shoulder button, this should display all the files on the CD



    Select the HDD Compatibility Partition Fixer folder and load the default.xex



    You will be warned about erasing the partitions on the hard drive, press A to create the compatibility partition.



    When this has finished switch the console off as instructed, then turn it back on again and load XEX Menu.

    Press the right shoulder button then use the D pad to navigate to the files on the DVD, now highlight the compatibility folder, press Y and select copy.



    Now press left on the D pad until you get to HddX, then press Y again and select paste.



    The hacked Xbox 1 Backwards Compatibility v5829 (November 2007) will now be copied to your console.

    The Xbox 1 emulator is now restored, this will let you run Xbox 1 games and some Xbox 1 homebrew.

    Your new hard drive is almost ready to use, all we need to do now is restore the avatars.

    **This is the risky part that could potentially brick your console if you don't listen, so pay attention!**

    To restore your avatars you need to run the official Microsoft dashboard update for the version of the dashboard your Jtagged 360 is running, To find out what version your console is running go to: System Settings > Console Settings > System Info



    Here we can see my console is running the 9199 dashboard so I MUST run the official 9199 update to restore my avatars.

    If i was to run a dashboard update newer than 9199 it would also update the 360 and not just restore the avatars like we want. If this was to happen the update would patch the exploit the jtag hack uses and blow an e-fuse. It would only be possible to recover from this if you had removed the R9T3 resistor when Jtagging the console. So think about what you are doing and you will be fine.

    Download: Xbox 360 NXE Dashboard Update 2.0.9199.0 With Avatars

    In the future newer dashboard versions will be released so please do check, at the time of posting 9199 is the latest dashboard.

    To restore your avatars you can either copy the relevant update to a FAT32 formatted USB drive or burn a DVD with the update on. Which ever you choose to do ensure a folder called $SystemUpdate is in the root the the USB drive or DVD with the system update files inside this folder, this can be seen in the screenshot below:



    After doing so ensure the Xbox 360 is on the dashboard, then connect the USB drive with the update on to the Xbox 360 or insert the DVD with update on. You will then have to then switch the console off, power it back on and your avatars should be restored.



    I think that should cover everything, hopefully your Jtagged Xbox 360 should have a nice large hard drive with a working Xbox 1 emulator and avatars.
    You could get to the end result of this tutorial in several different ways, I have tried to make this tutorial as easy as possible for beginners to follow.

    If you have any questions or problems do feel free to ask and I will do my best to help.

    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.


  2. #2

    Default

    wow i need this ..

  3. #3

    Default

    What is the fastest way to transfer data from one drive to another? I've used both FTP and and Explorer360 and both take forever. Anything quicker?


  4. #4
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    As you are using Xplorer360 I would guess the drive is FATX formatted?

    If thats so then FTP, its not that slow... you can read and write to the drive at 100mbps which is a lot faster than Xplorer 360 can, for me anyway.

    If your using FAT32 formatted external drives with Freestyle / XEX Menu then the fastest way could be just to connect both drives to your computer.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  5. #5

    Default

    The drive is FATX.

    FTP it is then. Maybe I should just keep less data on my drive if I don't like the backup time.

  6. #6
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    You could always just leave it backing up when you go to bed or something!
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.


  7. #7

    Default What about a used HDD?

    is this process is for a NEW HDD only?
    I want to upgrade my laptop HDD size, and at the same time use it for my Jtag. its already define with partitions, data and FS(NTFS).. can i just reformat it via the console @ use the above tool to erase previous configuration?

  8. #8
    Resident BigRod989's Avatar
    Join Date
    Oct 2010
    Location
    Tualatin, Oregon, United States
    Posts
    411

    Default

    ya long as your console is Jtagged it dont matter new or used just reformat it to the 360 format and your good to go

  9. #9

    Default

    Can I use a portable wd passport elite 2.5" hdd, if I remove it form the case and reformat it? I can buy one for $90 where a 1 TB internal 2.5" laptop bare bone drive is $115


  10. #10
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Yes you should be able to use any 2.5" SATA drive. Just bear in mind 12.5 mm drives are a tight fit when placed in the 360's enclosure, although its possible as you can see in the original post.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  11. #11

    Default

    Thanks for the quick response, will try and let you know.

  12. #12

    Default

    do you know how much of a performance difference there is to using a 7400rpm vs 5200rpm drive?

  13. #13
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Nothing noticeable at all, you might get the odd second improvement on loading here and there.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  14. #14

    Default

    hi InsaneNutter

    i want to upgrade the internal 360 hard drive , and have the 12611 dash with FSD 2.1. apart from the swaping of the drives, what update would i need to do to restore the avatars and then ultimately restore FSD 2.1 on the new drive.

    thanx for ur help

    idrees786


  15. #15
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Run the 12611 update with avatars to restore your avatars / kinect support.

    As for Freestyle how do you copy stuff to your 360? Just copy it off the old hard drive and back on to the new one. You could use XEX Menu (included with the ISO in my post) to copy it to a USB drive, then copy it back to your new hard drive.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  16. #16

    Default

    hi InsaneNutter

    thanx for ur prompt reply.

    cheers

    idrees786


  17. #17

    Default

    hey i just got a jtag today. my avatar needs a system update and i wanna use my kinect so im sure that does too. im scared to un jtag my box so i have dash version 2.0.13146.0. so i download the official 2.0.13146.0 update with avatar and load it into my box and it WONT de jtag my system right? i just got it today and spent good money i dont wanna brick it so please let me know. thx in advance!

  18. #18
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Yes that will be fine, you have the same system update as the dashboard you are on so it will just restore the avatars / kinect data. You will be fine, just NEVER run a newer system update otherwise you will not have a Jtag anymore.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  19. #19

    Default

    thx ill do that. also i loaded the hacked hdd backward compat cd and did everything and it freezes on white xbox logo while loading any xbox1 .xbe. i believe i read someone say that they could have disabled xbox1 compat in the freeboot settings while flashing it. would u happin to know how i would change this to get backward compat? how do i know what version of freeboot i have and how would i flash it. first time with jtag and i didnt do it myslef i bought it like this last night. thx again!

  20. #20
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Try installing Dashlaunch, that sorted out Xbox 1 games for most people that had problems: http://digiex.net/downloads/download...6-13599-a.html

    You can also disable system updates in the newer versions too, the installer should guide you through a lot of the setup. Dont enable the content patch as it messes DLC / arcade games up.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  21. #21

    Default

    Quote Originally Posted by InsaneNutter View Post
    Nothing noticeable at all, you might get the odd second improvement on loading here and there.

    Hello I have something to ask before i buy it tell me if u know the WD10JPVT 1tb 5400 2.5 is ok ? or i have problem

    i am already j taged jasper 256 v4 with 13599 update 20g the old one not dash launch yet but i install to new

  22. #22

    Default

    Quote Originally Posted by InsaneNutter View Post
    Try installing Dashlaunch, that sorted out Xbox 1 games for most people that had problems: http://digiex.net/downloads/download...6-13599-a.html

    You can also disable system updates in the newer versions too, the installer should guide you through a lot of the setup. Dont enable the content patch as it messes DLC / arcade games up.
    I installed dashlaunch and everything worked perfectly! i am now playin halo1 yyayy. thx a lot insanenutter!!

  23. #23

    Default

    Quick question. I just got my xbox jtagged and updated to the newest dash 13599. If I use the official update from microsoft 13599 to update my hdd for avatars is it safe. I just don't want to mess my jtag up. Thanks.

  24. #24
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Yes, if you use the official system update for the dashboard you are on it will just restore the avatars / kinect data.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  25. #25

    Default

    Quote Originally Posted by InsaneNutter View Post
    Yes, if you use the official system update for the dashboard you are on it will just restore the avatars / kinect data.
    Sorry to sound so noobish here but i too have just updated from a realy old dashboard to 13599 so if i reinstall 13599 official update from MS will that make my jtag a non jtag even though i have 13599 dash running already but i too do not have the avatar option available it says i need an update.

    Again sorry if it sounds noobish im just scared of ruining my jtag which i adore so much.

    TIA.

    G.

  26. #26
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    As you are on dash 13599 you can run the official MS 13599 update, just never run anything newer than the dashboard you are on.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  27. #27

    Default

    Quote Originally Posted by InsaneNutter View Post
    As you are on dash 13599 you can run the official MS 13599 update, just never run anything newer than the dashboard you are on.
    Thank you,can i get the officila 13599 from MS site or will one of a torrent do the job IN??

  28. #28
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    I would personally get it from the Download Center here on the website: http://digiex.net/downloads/download...oad-final.html

    You will know it really is 13599 then.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  29. #29

    Default

    Quote Originally Posted by InsaneNutter View Post
    I would personally get it from the Download Center here on the website: http://digiex.net/downloads/download...oad-final.html

    You will know it really is 13599 then.
    Once again IN thank you for your quick response and support it is very much apreciated.

  30. #30

    Default

    I got a 60GB HDD to my JTAGGED console, i wanna buy a samsung 1TB SATA2, after i run the update, can i copy the files from the 60GB hdd to 1TB hdd with xplorer?

  31. #31

    Default

    I've been searching for this answer but cant' find it anywhere... i have a jtag on 13599 dash. just bought a 1tb upgraded hard drive and now i have no avatars. found a guide that indicates i must format drive and then update with official ms dash 13599 dash to get avatars and kinect. BUT i'm worried about doing the official update and having it reflash my drive... i know this official update reflash non jtags drives but i'm not sure if it updates jtag drives...

    i know with a jtag i dont NEED a drive however i have a large collection of disks that i might want to rip in the future...

    any advice?

  32. #32
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Quote Originally Posted by Franx View Post
    I got a 60GB HDD to my JTAGGED console, i wanna buy a samsung 1TB SATA2, after i run the update, can i copy the files from the 60GB hdd to 1TB hdd with xplorer?
    Yup you can.


    Quote Originally Posted by grither View Post
    I've been searching for this answer but cant' find it anywhere... i have a jtag on 13599 dash. just bought a 1tb upgraded hard drive and now i have no avatars. found a guide that indicates i must format drive and then update with official ms dash 13599 dash to get avatars and kinect. BUT i'm worried about doing the official update and having it reflash my drive... i know this official update reflash non jtags drives but i'm not sure if it updates jtag drives...

    i know with a jtag i dont NEED a drive however i have a large collection of disks that i might want to rip in the future...

    any advice?
    I don't believe it does as your not actually running the system update part that does, your simply restoring the avatars / kinect data. The update will just presume your drive is flashed as you are already on 13599.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  33. #33

    Default

    Quote Originally Posted by InsaneNutter View Post


    Yup you can.
    Thanks...and, I got a Xenon board, it's SATA2? SATA3 I think is not supported, but SATA2?

  34. #34
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    SATA 2 should work fine, not sure about SATA 3.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  35. #35

    Default

    will this work with JTag with dash 2.0.13599.0? thanks( I upgraded internal hard drive to 1.5TB and lost avatar support)

  36. #36
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Yes it will work fine, just use the 13599 update to restore the avatars.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  37. Thanks from:


  38. #37

    Default

    i added a 1.5TB drive to my Xbox 360 JTag,and copied the contents from my 120 gig drive to it and is shows in the system memory as being 250Gig drive with only 129Gigs free and in freestyle dash as being a 1.5TB with only 129Gigs free.(i got my Avatars back working)

  39. #38

    Default

    backward compatibility is not needed anymore right? i think it's integrated with new dashboards...

  40. #39
    Resident Nutter InsaneNutter's Avatar
    Join Date
    May 2007
    Location
    Yorkshire, England
    Posts
    9,065
    Blog Entries
    11

    Default

    Nope you still need backwards compatibility, its not integrated with any dashboard.
    Phone: Galaxy Nexus - 16gb - bootloader unlocked & rooted - running Cyanogenmod 11 (Android 4.4)
    Tablet: Asus Transformer Prime - 32gb - rooted - running Cyanogenmod 10.2 (Android 4.3)
    360: Jasper - 1tb drive - jtag hacked running the 16547 dash (thanks to XeBuild)
    360: Falcon - 500gb drive hacked with hddhackr, not flashed

    Have a question or need help? Post on the forum, thats why it's here. I will only reply to Digiex related issues via PM, not general help requests.
    If i helped you say thanks by signing up for Dropbox with my referral link, we will both get an extra 500mb of space for free.

  41. #40

    Default

    Are you sure? Because if you search "Backward compatibility" on official microsoft site they say "Update to last dashboard and play all your games"!

Similar Threads

  1. [Xbox 360] Extract demos from the Xbox 360 hard drive
    By InsaneNutter in forum Xbox 360 Guides
    Replies: 25
    Last Post: 04-09-10, 10:45
  2. Replies: 3
    Last Post: 23-07-10, 15:11
  3. add 250gb hard drive to xbox 360
    By raidercoy in forum General Chat
    Replies: 1
    Last Post: 09-04-10, 04:51
  4. 250GB Hard Drive now available for Xbox 360
    By xzKinGzxBuRnzx in forum News and Article Submission
    Replies: 0
    Last Post: 25-03-10, 04:31
  5. (US) Xbox 360 120GB Hard Drive $40 off
    By Dark Scyth in forum Gaming Hangout
    Replies: 4
    Last Post: 24-08-09, 21:59

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Digiex is a technology and gaming forum, founded in 2004 by InsaneNutter and Nimrod. Digiex has served the internet community with breaking news, detailed guides, exclusive downloads and a popular discussion forum. A small, friendly community of like minded people has developed over the years. People are encouraged to register and participate in on-going discussions.
Join us