Does hddhacker work on WD Blue 320 gb LPVX hard disk(WD3200LPVX) ?

Does hddhacker work on WD Blue 320 gb LPVX hard disk(WD3200LPVX) ?


  • Total voters
    7

HumanSaviour

New Member
Joined
Nov 25, 2013
Messages
2
I have got a new wd hdd but its LPVX model, WD Scorpio Blue 320GB SATA - 2.5 "HDD 5400RPM, 8MB Cache Buffer, 7mm SATA3 (6Gb / s)
Model: [WD3200LPVX] .

Can I use it with hdd hacker to make it compatible with xbox 360.

hdd.png

Thanks in advance.
 
It does work, one last consideration regarding this specific HDD, it goes to sleep automatically after 10 seconds of inactivity.
There is no way to remove this feature, and the disc will wear considerably fast.
 
I tried hddhackr on WD3200LPVX but it failed :

WD.JPG

CMOS can identify the WD3200.

Please help ! Thx.
 
If you're asking if this drive works for xbox, then yes.
If you're asking if this drive works for xbox, then yes.

hi,
My brand new WD3200LPVX is worked fine with hddhackr 1.4 and successfully flushed, however it is not recognized by XBOX 360 E, which just simply not shown up on the device list.
I've tried many times, including using different hddss.bin (120g, 250g), but none of them solved the problem.
Not sure what is causing it... Could it be a hardware compatible problem??
Can anyone give a help with this? Would be great Thanks ! :)
 
hi,
My brand new WD3200LPVX is worked fine with hddhackr 1.4 and successfully flushed, however it is not recognized by XBOX 360 E, which just simply not shown up on the device list.
I've tried many times, including using different hddss.bin (120g, 250g), but none of them solved the problem.
Not sure what is causing it... Could it be a hardware compatible problem??
Can anyone give a help with this? Would be great Thanks ! :)
Undo the drive with the undo file. Format to ntfs then try the hack again.
If that doesn't work then do this.

I flashed my drive and it doesn't show in the xbox 360.
Use this tool in this thread to test/wipe the drive. Data Lifeguard Diagnostic For Western Digital Drives
 
hi,
My brand new WD3200LPVX is worked fine with hddhackr 1.4 and successfully flushed, however it is not recognized by XBOX 360 E, which just simply not shown up on the device list.
I've tried many times, including using different hddss.bin (120g, 250g), but none of them solved the problem.
Not sure what is causing it... Could it be a hardware compatible problem??
Can anyone give a help with this? Would be great Thanks ! :)


I have same problem with this HDD. Firmware flashed succesfully, but it doesn't show in my xbox360 E.
I tried several diferent PC, I also tried WD Lifeguard control and wipe my drive, did not help :(
 
They are ran out of model BEVT, LPVT
only LPVX at store in my country.

My first try with xbox S : failed
 
Sorry, Can I take my word back.

WD3200 LVPX model work perfectly with my XBOX 360 Falcon. :D
yayyyy.
The answer is : YES.
 
Sorry, Can I take my word back.

WD3200 LVPX model work perfectly with my XBOX 360 Falcon. :D
yayyyy.
The answer is : YES.
I have read that that model doesn't work... Do you have jtag? If yes, this is why your Xbox reads your LVPX hard drive
 

About Digiex

Digiex is a technology and gaming forum, founded in 2004 by InsaneNutter and Nimrod. Digiex has served the internet community with breaking news, detailed guides, exclusive downloads and a popular discussion forum. A small, friendly community of like‑minded people has developed over the years. People are encouraged to register and participate in on‑going discussions.

Get Social

Back
Top Bottom