How to Update you JTAG Xbox to the New 12611 Dash

Discussion in 'Console Help Center' started by slimwadey, Nov 12, 2010.

  1. slimwadey

    slimwadey Addict

    Joined:
    May 27, 2010
    Messages:
    260
    Likes Received:
    18
    Location:
    SE London
    This guide assumes you have read the Insane Nutters post and have downloaded the Relevant software


    See that post Here> https://digiex.net/guides-reviews/c...60-kernel-dashboard-12611-fbbuild-0-11-a.html


    This is my first Tut and i may have made the odd mistake, if so let me know and i will correct it



    First open up fbBuild_0.1.zip

    Extract to a Folder on your desktop (i use winrar)

    Within that folder open up the DATA folder.

    Now open 12611.zip and extract contents to that data folder.

    Download 360 Flash tool v 0.94 (google it)


    Open Flash tool and hit settings then keys
    Enter your CPU key in, then close the pop up box and go back to the main screen
    Click the button on the top left and browse to your original nand image. All your data on the right should now be displayed.

    Now click extract on the bottom and check KEYVAULT and CONFIG in the pop up window

    Hit ok and then select to extract this data to a new folder on your desktop.

    You should have two files in the new folder called Kv.bin and Smc_config.bin

    You need to copy those 2 files to the MYDATA folder within the fbBuild folder

    Once you have them copied there open up the CPUKEY.txt file and input your Cpu key on the first line, overwriting the dummy one in and save it.

    Now open up SMC PACK and extract the smc.bin for your motherboard type to MYDATA folder.

    Rename this file to smc.bin

    You should now have SMC.bin, SMC_CONFIG.bin, and KV.bin in the my data folder
    And the CPU key

    Now go to the main directory of fbBuild and open up 1BL.txt and change the dummy line to

    DD88AD0C9ED669E7B56794FB68563EFA

    You now are ready to build your image

    Open up Command prompt and navigate to the correct folder

    C:\Documents and Settings\User\Desktop\fbBuild or wherever your fbBuild folder is

    Then you need to run this command

    fbBuild -c (MB type) -d mydata updflash.bin


    So mine looked like this, > fbBuild -c xenon -d mydata updflash.bin

    this will create your updflash.bin in the root directory of fbBuild

    It will prompt you that its complete
    You can now use the updflash.bin to flash this to your Xbox
    Either use Flash360 (i did) or a nand flasher or through Xellous


    This worked on my xenon console, i have not tried another console yet but i have a falcon to update too so when i update that i will post more info on how it went

    Steve
     
  2. xzKinGzxBuRnzx

    xzKinGzxBuRnzx The Feature Man

    Joined:
    Aug 9, 2008
    Messages:
    1,875
    Likes Received:
    1,239
    Location:
    Space
    If you add some pictures I'd love it. My jtag will be performing this guide soon. So it would be very helpful.
     
  3. Corona

    Corona Addict

    Joined:
    Sep 1, 2010
    Messages:
    576
    Likes Received:
    167
    thanks did you come up with this. thanks
     
  4. Ajie Prahasto

    Ajie Prahasto Member

    Joined:
    Nov 2, 2010
    Messages:
    13
    Likes Received:
    0
    Location:
    Indonesia, palangkaraya
    more questions from tottaly newbie

    :Dfirst i want to thanks to insanenutter for his quick response to my questions in last thread.
    now to "slimwadey" my questions is simple,
    1.what if i dont have my original nand? since i dont have it from the very beginning i bought my jtag console
    additional, i've tried using flash360 to dump my nand is it use-able in upgrading jtag dashboard?

    2. my jtag is jasper, what should i write in consle choice? should it write this way "fbBuild -c (MB type) -d mydata updflash.bin"
    thanks for your answer...

    warm regards,

    Ajie
     
    Last edited: Nov 12, 2010
  5. Ajie Prahasto

    Ajie Prahasto Member

    Joined:
    Nov 2, 2010
    Messages:
    13
    Likes Received:
    0
    Location:
    Indonesia, palangkaraya
    have more questions:

    step by step following your tutorial
    "First open up fbBuild_0.1.zip"
    ok
    Extract to a Folder on your desktop (i use winrar)
    ok
    Within that folder open up the DATA folder.
    ok
    Now open 12611.zip and extract contents to that data folder.
    ok
    Download 360 Flash tool v 0.94 (google it)
    ok

    Open Flash tool and hit settings then keys
    ok
    Enter your CPU key in, then close the pop up box and go back to the main screen

    ok

    Click the button on the top left and browse to your original nand image. All your data on the right should now be displayed.
    ok

    Now click extract on the bottom and check KEYVAULT and CONFIG in the pop up window

    Hit ok and then select to extract this data to a new folder on your desktop.

    You should have two files in the new folder called Kv.bin and Smc_config.bin
    from here, i got 3 file (not 2) it is:
    config.bin
    KV_dec.bin
    KV_enc.bin
    log.txt (i didnt count this)


    what should i do next


    You need to copy those 2 files to the MYDATA folder within the fbBuild folder

    Once you have them copied there open up the CPUKEY.txt file and input your Cpu key on the first line, overwriting the dummy one in and save it.

    Now open up SMC PACK and extract the smc.bin for your motherboard type to MYDATA folder.
    where is this file came from?
    Rename this file to smc.bin

    You should now have SMC.bin, SMC_CONFIG.bin, and KV.bin in the my data folder
    And the CPU key

    Now go to the main directory of fbBuild and open up 1BL.txt and change the dummy line to

    DD88AD0C9ED669E7B56794FB68563EFA-----> what is this string? from where did it came up?

    You now are ready to build your image

    Open up Command prompt and navigate to the correct folder

    C:\Documents and Settings\User\Desktop\fbBuild or wherever your fbBuild folder is

    Then you need to run this command

    fbBuild -c (MB type) -d mydata updflash.bin


    So mine looked like this, > fbBuild -c xenon -d mydata updflash.bin
    so mine will look like this: fbBuild -c jasper -d mydata updflash.bin isnt right?
    this will create your updflash.bin in the root directory of fbBuild

    It will prompt you that its complete
    You can now use the updflash.bin to flash this to your Xbox
    Either use Flash360 (i did) or a nand flasher or through Xellous
     
  6. MasterChief

    MasterChief Addict

    Joined:
    Sep 17, 2009
    Messages:
    743
    Likes Received:
    88
    Location:
    The Internet
    You did not include this SMC Pack mate, the guide gets a little bit confusing around there... not sure why you need that anyway? Just thought I would let you know.

    I think you are describing the same way I updated yesterday afternoon anyway.
     
  7. gomson

    gomson Member

    Joined:
    Dec 8, 2008
    Messages:
    12
    Likes Received:
    0
    The tutorial is a little vague...
    Sooo many things not working as it says it should...
     
  8. MasterChief

    MasterChief Addict

    Joined:
    Sep 17, 2009
    Messages:
    743
    Likes Received:
    88
    Location:
    The Internet

Share This Page