Updated Xbox 360 bricked

  • Thread starter Thread starter Deleted member 91705
  • Start date Start date
D

Deleted member 91705

Guest
Hello i need help. I updated my xbox 360 yesterday but after update it didn't start. How to fix this please tell me.
 
Was this a Jtag / RGH hacked Xbox 360, a normal Xbox 360? how did you update it?
 
Unfortunately using a newer system update to restore the kinect data will brick a Jtag / RGH.

What happens when you power the Xbox 360 on with the DVD eject button? if it boots in to Xell you can flash a hacked nand backup and the Xbox 360 working again.
 
Unfortunately using a newer system update to restore the kinect data will brick a Jtag / RGH.

What happens when you power the Xbox 360 on with the DVD eject button? if it boots in to Xell you can flash a hacked nand backup and the Xbox 360 working again.
yes it is launching xell
 
Unfortunately using a newer system update to restore the kinect data will brick a Jtag / RGH.

What happens when you power the Xbox 360 on with the DVD eject button? if it boots in to Xell you can flash a hacked nand backup and the Xbox 360 working again.
and how to do it?
 
The other option is to take the console back to who ever modded the console and ask them to help, they will have the hardware to re flash it for you.
 
The other option is to take the console back to whoever modded the console and ask them to help, they will have the hardware to reflash it for you.
ok so I got a network cable and when I connect it to Xbox 360 it is giving me IP address 192.168.1.99. when I try to write this on chrome it didn't load.
 
That's your internet ip address, which will be different to your IP address on your home network. I want to know your local ip address of your PC / Laptop on your home network.

Open Command Prompt and type ipconfig /all you should then see something like this below:

windows-ipconfig.png


Its the IPv4 Address I want to check.
 
That's your internet ip address, which will be different to your IP address on your home network. I want to know your local ip address of your PC / Laptop on your home network.

Open Command Prompt and type ipconfig /all you should then see something like this below:

windows-ipconfig.png


It's the IPv4 Address I want to check.
192.168.1.17
 
Your Computer and 360 should be on the same network then, what happens when the 360 has Xell loaded and you type ping 192.168.1.99 in command prompt?
 
Your Computer and 360 should be on the same network then, what happens when the 360 has Xell loaded and you type ping 192.168.1.99 in command prompt?
it is saying
Pinging 192.168.1.99 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.

Ping statistics for 192.168.1.99:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
 
I suspect the 360 is not actually connected to your network, looking at your router is their any indication that it is?
 

About Digiex

Digiex is a technology and gaming forum, founded in 2004 by InsaneNutter and Nimrod. Digiex has served the internet community with breaking news, detailed guides, exclusive downloads and a popular discussion forum. A small, friendly community of like‑minded people has developed over the years. People are encouraged to register and participate in on‑going discussions.

Get Social

Back
Top Bottom