• Welcome to the Digiex Download Center, you are welcome to download anything you like here, no registration is required! We offer direct download links with no captchas or wait times.
    We do our best to ensure no content infringes copyrights, and provide a DMCA Takedown Request Form to request the removal of content from Digiex

Xell Launch with Xell Reloaded (HDMI Support) and a Quickboot Shortcut Download

InsaneNutter

InsaneNutter

Resident Nutter
Staff member
Joined
Jun 1, 2007
Messages
11,931
Location
UK
Unzip XellLaunch.zip
Copy to Partition 3 \Apps\XellLaunch

Unzip Xell-Launch-Shortcut.zip
Copy to Partition 3 Content\0000000000000000\C0DE9999\00080000

Xell Launch should now appear under the Demo's section on the Xbox 360's dashboard.

You will be able to boot directly in to Xell Reloaded (has HDMI support) from the Microsoft Dashboard.

Download Xell Launch with Xell Reloaded

Download Xell Launch Shortcut
 

Attachments

i can only boot into xellous reloaded cannot get into nxe. how do i install xexmenu to get FSD going or do i need to!

is there a usb ready directory that you could pass along, so i know what and all files needed at root in order to get anything going. i have been looking at xellous reloaded for 4 days. Please for the love of humanity. help*-)
 
It sounds like you have done a bad update and can only boot Xellous.

Try building your nand following this tutorial here: https://digiex.net/guides-reviews/console-guides/xbox-360-guides/9574-easily-update-your-jtagged-xbox-360-kernel-dashboard-13604-fbbuild-0-33-a.html

Instead of Flashing with 360 nand flasher you can flash with Xellous by putting the updflash.bin on your USB stick and loading Xellous.

Note you will need to have a backup of your nand as you will not be able to dump the existing one in the same way as the tutorial states.
 
yes it was my LDV Lock Down Value

Thanks Nutter for your reply, Changed my ldv in 360 flash tool, i got into fb finally after playing with nands for 4 days. I was lost mostly because I was not 100% on which jasper i had. Logic told me it was 16mb because i had no memory unit in memory settings. It was a big block though and I tried my first setup without DVD Drive and only on HDMI. Not sure if that all mattered or not now that the LDV is good and i got FB(H)
 
hi there.i have a corona v2 250 gb.i had dumped my nand but when i try to update it from XEBUILD.it shows bad block found.my nand size is of 48 mb.
please can anybody help me
 
You must log in or register to reply here.
Top Bottom