Easily update your Jtagged Xbox 360 to Kernel / Dashboard 13604 with FbBuild 0.33

I followed everything in the tutorial....except for dumping the nand with nand360 (I used flash360).


After shutting off my console and unplugging for a minute, I plugged it allback in, turned it on. And got E79

 

same problem 13604 not detected for avatar

I do have the same problem, my xbox 360 won't detect the 13604 update after updating my JTAG with the 13604.
I tried the USB and CD. when I launch the CD it's says your console is up to date.

FAT,FAT32 different kind of usb key and no pop up for update.
How do I uninstall dashlaunch and reinstall it to make sure it's properly installed ?

Thank you

 

Get a propper Xbox then.

 

man i need your help so bad , ive followed every step , and once i get to this bit (Once in the fbBuild_0.33 folder we can now build the nand

To build your hacked nand type:

fbbuild.exe -c <your console revision> -f 13604 -d mydata updflash.bin

Type one of the following depending on which revision your console is, this can be: xenon, zephyr, falcon, jasper, jasper256, jasper512

fbbuild.exe -c xenon -f 13604 -d mydata updflash.bin
fbbuild.exe -c zephyr -f 13604 -d mydata updflash.bin
fbbuild.exe -c falcon -f 13604 -d mydata updflash.bin
fbbuild.exe -c jasper -f 13604 -d mydata updflash.bin
fbbuild.exe -c jasper256 -f 13604 -d mydata updflash.bin
fbbuild.exe -c jasper512 -f 13604 -d mydata updflash.bin ) , it all fucks up , it says Could not read smd.bin (-1)
ERROR Critical bootloader files are missing , cannot proceed !
FATAL BUILD ERROR : -1 unable to complete NAND image , Pleease help me !!! i will be so greatful

 

C:\Users\owner\fbBuild_0.33>fbbuild.exe -c xenon -f 13604 -d mydata updflash.bin


**** could not read smc.bin (-1) ****

******* ERROR: critical bootloader files are missing, cannot proceed!



***** FATAL BUILD ERROR: -1 unable to complete NAND image

It still aint working ! i keep getting the same error code , even after following your tutorial on the other one with the smc.bin thing. youve gotta help me man , what else can i try ?

 

Thanks for a clear tutorial but I have one question,I have a jtag xbox without a DVD drive.Will the -o nodvd be the correct option for me as when I built the file with this option it says that xell will start if tray is not closed at boot time and I don't want it to boot into xell all the time.

Thanks.

 

Just registered to say thanks for such a simple tutorial, worked first time upgrading to 13604

I will check out the rest of the site while im here.

 

i use windows 7 and a common over looked error is hidden file extention names like .bin etc, this error has happened to me many a time so try this:

open up your documents folder
click on organize then folder and search options
click the view tab
then untick "Hide extensions for known file types"

whats probably happening is when you rename the origional nand to nanddump.bin like it says in the tutorial. If you go back to check the file name of the nand you will notice its now named as nanddump.bin.bin
simply just rename your nand to just nanddump, it should now build your image, this happened to me. Just re tick the box again once its finished.

Hope this helps people out

 

thanks , it helped man ! but i got another error now , i get ---------------------------------------------------------------
fbBuild v0.33 (R:272)
---------------------------------------------------------------


**** could not read patches_xenon.bin (-1) ****

******* ERROR: critical bootloader files are missing, cannot proceed!



***** FATAL BUILD ERROR: -1 unable to complete NAND image
, error after error

 

Hey guys,

I followed this tutorial two times, and one time (Jasper 16mb) it worked out perfect, thanks!

The other time (Falcon) after writing updflash.bin to my nand I recieve, after booting, the E71 Error (Update Error). I know how to remove this error by downgrading back to 126xx, but I would like to play XGD3 Games. Any Ideas how to fix this?

 

i sure my nand not have xell or xellous
can i install xell to my nand and after that take picture to cpu key
if i installed xell the console dash still working or that delete its program
master chief please help me

 

hello hello insanenutter!
i have read all your tuto and the others members messages but i don't find the answer to my question.
I have a jtag Xenon 8955 and i want to update to 13604.
First case : I've read that it is better to do the 9199 update before the 13604 update. so i go on your tuto "how to update your Jtagged Xbox 360 to Freeboot 0.032 (9199 Dash / Kernal)". i dump my actual nand (xenon CB 1921) with flash360 and when i run freeboot toolbox maker24r3, the program stops at 38% (error : missing crl.bin). But when i use my orignal nand (xenon CB 1903) when i first jtagged my xbox360, everything is ok. Question : Can i update my jtagged xobx360 with the updated (9199) nand using the original nand (xenon CB 1903)? I think it is not a good idea but i would like your advice. How do i solve the missing crl.bin error? ( i have tried the Easy rebuilt v0.1 but it doesn't work because it is only for jaspers).
Second case : everything is ok when i follow your tuto step by step (easily update to dahsboard 13604 with fbbuild 0.33) but i haven't flashed my actual nand with the updated nand because i have read that's it's better to do the 9199 update first...If i flash my nand, and something goes wrong, will i be able to go back to the former nand?

i feel like turning around...
thanks for your help

 

Thank you InsaneNutter!

I had 12611 n i tried to play 3 games, Halo Combat, MW3 and AC Rev.
With 12611 I Could play just 1 game(MW3).

With the new dash 13604 i can play them all.

Thanks again for the tutorial mate

 

Had one more question,

now my freestyle dash 1.09 would start, how can i reinstall it or even better, is ther another version?
another tut for updating freestyle dash? TeamFSD is down so can anyone help me out plz

greetz LQ

 

i got another error now , i get ---------------------------------------------------------------
fbBuild v0.33 (R:272)
---------------------------------------------------------------


**** could not read patches_xenon.bin (-1) ****

******* ERROR: critical bootloader files are missing, cannot proceed!



***** FATAL BUILD ERROR: -1 unable to complete NAND image
, error after error