Hey guys
I'm new here and need some help with my recently JTAG'd X360 console.
https://digiex.net/computing-sectio...360-how-hack-250gb-sata-drive-work-360-a.html
^ I have followed this guide successfully to setup a new HDD for unmodified consoles...as well as just the plug in/format option for new HDD's if the console is JTAG'd...that's all been sorted no problem.
I bought a 500GB drive, after the X360 format, i can tell via Xport 360 that the 3 partitions are there, although no folders in them. Therefore, I accessed my original 60GB drive, backed up Partition 2 (to a BIN file) as instructed in the guide above...and given i have profiles, game saves, arcade games etc to transfer - I used Xport 360 to DRAG AND DROP the entire "Content" folder to my HDD. After looking deep into these folders it looks to have successfully coped everything over.
When i plug in my new 500GB HDD and do the Partition 2 restore (for Xbox1 title compatability), i then, once more, use the DRAG AND DROP feature and drag the entire "Content" folder from my PC to the new HDD via a direct sata cable to Partition 3 -- this completed successfully, and ONLY the CONTENT folder is viewable (only thing on there since HDD format). When I plug it into my console, the HDD is recognised, the size/space available has decreased by ~30GB showing the obvious inclusion of new data...HOWEVER, i cannot view a single installed full game, arcade game or video...nothing! What have i done wrong?!
By the way, I mainly use Xport 360 to view/backup files only because the makers of Xplorer 360 didn't really think terribly much about the "troubleshooting" and BIG side of their programs -- the crappy program chooses to CRASH every time when using the USB transfer cable. Therefore, for EACH program i am forced to open my PC and use a SATA/power cable to connect the drives so they are accessible on a STABLE basis... Any help is appreciated.
Thanks
RoOSTA
I'm new here and need some help with my recently JTAG'd X360 console.
https://digiex.net/computing-sectio...360-how-hack-250gb-sata-drive-work-360-a.html
^ I have followed this guide successfully to setup a new HDD for unmodified consoles...as well as just the plug in/format option for new HDD's if the console is JTAG'd...that's all been sorted no problem.
I bought a 500GB drive, after the X360 format, i can tell via Xport 360 that the 3 partitions are there, although no folders in them. Therefore, I accessed my original 60GB drive, backed up Partition 2 (to a BIN file) as instructed in the guide above...and given i have profiles, game saves, arcade games etc to transfer - I used Xport 360 to DRAG AND DROP the entire "Content" folder to my HDD. After looking deep into these folders it looks to have successfully coped everything over.
When i plug in my new 500GB HDD and do the Partition 2 restore (for Xbox1 title compatability), i then, once more, use the DRAG AND DROP feature and drag the entire "Content" folder from my PC to the new HDD via a direct sata cable to Partition 3 -- this completed successfully, and ONLY the CONTENT folder is viewable (only thing on there since HDD format). When I plug it into my console, the HDD is recognised, the size/space available has decreased by ~30GB showing the obvious inclusion of new data...HOWEVER, i cannot view a single installed full game, arcade game or video...nothing! What have i done wrong?!
By the way, I mainly use Xport 360 to view/backup files only because the makers of Xplorer 360 didn't really think terribly much about the "troubleshooting" and BIG side of their programs -- the crappy program chooses to CRASH every time when using the USB transfer cable. Therefore, for EACH program i am forced to open my PC and use a SATA/power cable to connect the drives so they are accessible on a STABLE basis... Any help is appreciated.
Thanks
RoOSTA
