Hack a 250gb, 320gb or 500gb Sata harddrive to work in the Xbox 360 and Xbox 360 Slim

undo.bin please

Or you is undo.bin WD5000BEVT-22ZAT0 please please..... skype:compysnake85

 

ı need help
can someone send me wd3200bjkt undo.bin

 

500 GB Western Digital Scorpio. Western Digital XL50. Would this work? I just had this lying around at work. Don't wanna dish out money ​

 

It will probably work.

 

Would do this cause MS to ban you from XBL??

Also would getting a 2TB drive and make say 6 partitions show up as 6 320GB harddrives on the storage tab in NXE??

 

Nope.
I think the second question is around jtags, it would work with jtag only and not a non hacked xbox 360.

 

In keeping with a 2TB hard drive, could you partition 320GB of the 2TB for normal xbox use (LIVE) and then the rest as normal drive for tjag/RGH use for Dual NAND consoles?

Is there any harm in using the the internal HD for jtag/RGH stuff, can MS detect anything on the internal drive that should'nt be there like you'd get with using a jtag/RGH console?

Is it best to always use an external drive for a jtag/RGH console?

 

You dont have to use an external hard drive for a jtag/RGH xbox, but its recommended, ms cant detect anything on the internal hard drive just the homebrew that'd be on your profile lol

 

Well ill be using my LIVE profile for my RGH games so i can added to my achievement score, i know about not login in with your online profile until a game has been loaded so no homebrew crap gets written to your profile.

I guess if MS cant detect any of the homebrew programs id have on the internal HD, im might aswell get a 2TB 2.5" drive and partition 320GB for normal Xbox use and then use the rest for jtag/RGH use, will work out cheaper than getting a 2TB external drive

 

just dont load any homebrew crap onto your profile mate haha

 

You can't do that with a hard drive, The hdd security sector lets you use up to 320gb only for xbox 360 non hacked.Any messing around after that point won't work because the drive will show up as a 320gb and not a 2tb
I don't think there is a 2tb 2.5 drive available, i have seen 1tb 2.5 drives.

 

do I have to reformat with the 360 again if HDDhacker prepeares the partitions?

If I get the western digtal 250 or 320GB and use HDDhackr to format and prepare the paritions, do I need to format with the 360 again? Or is it ready to go with no reformat needed on the 360 since HDDhackr took care of it? I read somewhere else that the console would requre the console serial # but I'm not sure if it ties it to the console or not. If I don't need to format with the 360 then I can move my files to my 16GB flash drive a little at a time. I can re-install games if I need to that isn't a big deal.

Thanks.

 

I like formatting on the xbox 360 after flashing the drive. Then reconnect to computer for transfer partition 2 & gamesaves or using a usb works better though.
The serial number entry is for extra security so you don't accidentally format the drive.

 

Is this a limitation of HDDhackr or the 360 itself? As i was under the impression when in RGH mode the xbox sees all type of 'normal' hard drives and doesnt need to be in 360 speical format, as when you plug in a USB stick the 360 asks how much of the capacity you want to use for xbox storage! So could you have a 1TB drive run HDDhackr on it for the full 1TB and tell the 360 only to use 320GB for xbox, and then format the rest to FAT32 so it can be used in RGH mode??

 

Hi, new here. I know this is old, but it's very informative and I didn't want to create a new thread. I have an Xbox 360 Slim 4gb model which was purchased just recently. Hardly used at all actually since I'm just getting started. Anyway, I've tried to sift through all of the posts over the last 45 pages and I'm not sure I've found the answer to my question yet. I purchased a WD Scorpio Black WD3200BEKT (the blue WD3200BEVT is rather hard to come by at a decent price) today and I'm waiting for it to arrive. In the meantime, I was curious about the steps after the drive is flashed. I want to install the Xbox 1 emulator, but I don't have a hard drive with saved data or anything like that. I downloaded Hoffman's partition 2 in preparation for this though. However, my question is when the time comes do I only restore partition 2 with Xplorer 360 Extreme, or do I also need to restore partition 3 with Xplorer 360 320gb? I'm just uncertain if the restoration of partition 3 is needed in my case or not. Thanks in advance for any advice

 

Just restore partition 2 and that's it. Partition 3 is only if you had a previous drive and you wanted to restore the saves/profiles/dlc.

 

Great, thanks for the quick reply!!

 

First I'd like to thank insanenutter and all who have made this great post.

I am a little unsure of my success. I got an error:

Warning: LBA size seems to be an unsupported XBOX360 value.
Please contact authors!

My LBA size is 625442448

I continued on and it reported success, but I can't test it until tomorrow or Sunday when I get to my nephew's.

I have a WD Scorpio Blue 320GB WD3200BPVT dated March 18, 2012.

Is this error going to give me trouble? or is this common for this drive?

also, I could run hddhackr on my A75 Llano motherboard or my Z68 motherboard. Seems like it doesn't like the newer chipsets. Luckily I still have an old Dell P4 lying around and it worked from there. This board found the drive, the other two didn't find anything plugged into the sata ports. IDE was enabled on all machines.

My nephew has an old XBOX so will I need to do anything to make this drive work with his old games. the new XBOX360 Live Kinnect I got him for Christmas says it needs a hard drive upgrade to play old games on the new machine. I was going to test on my identical Kinnect system, but I was afraid it may lock itself to my machine.

-=Mark=-

 

Hard drives work on any console they don't lock, the hard drive should work fine. Feel free to try it on your console.