darkangelism
Member
- Joined
- Feb 5, 2010
- Messages
- 5
what trouble are you having?

Restoring your WD to original state:
If you don't want to use your modded WD HDD in your XBOX360 anymore and you want to
flash it back to its original size/state, then you can now do so. Boot to MS-DOS and
run 'HDDHACKR R [PORT] A0 UNDO.BIN'. This will use the UNDO.BIN file you created before to
restore the drive to its original state.

I just wanted to say there was a way to get the Forza 3 profile to work without a memory card.
1. Create your custom hard drive and copy everything from your old partition 3 to the new one.
2. After this is done go into the new HDD with Xplorer and navigate to Partition 3 -> Content -> EBFCD05D81D3715F -> 4D53084D -> 00000001 (this is the folder where forza 3 files are stored and you should know if your in the right folder because you will see a file called ForzaProfile and some other files too like replay, photo ect)
3.Copy all the files inside to a folder somewhere on your computer (to make it easy create a folder on your desktop called forza and place them inside) then delete all the files from the HDD.
4. Place the HDD into the xbox and boot up forza and create a new save game and after this is done shut the xbox down and place the HDD back into the computer.
5. Go into windows open Xplorer and navigate to the same directory as before. There should only be one file in there (ForzaProfile) and copy that to the desktop or another folder but not the same folder where other forza files were copied.
6. Open up Concept Resigner, click open and select the ForzaProfile file that is on the desktop (the one that was just copied over from the HDD) Open up notepad and copy Profile ID and Device ID to it (these are the numbers that are the key to getting this working)
7.Now open any file file from the Forza folder and paste Profile ID and Device ID to the program and click Resign (you must do this to all the files inside to get this working NOTE: the file 'movies' will not open for some reason so just skip it)
8. After all the files have this new Profile ID and Device ID open up Hash Block Calculator and open each files one by one and make sure that under Proper? everything is set to True. If there is a file with False under Proper? then go to tools and select Calculate Hash Blocks.
9. After this is all done copy all the files now back to the HDD in the same directory it came from and place it in the xbox and enjoy your Forza 3 save =D
You might get prompted for a update. This will probably work for any game but don't hold me responsible for your mistakes or if you get banned. I don't know if this will ban you. I hope this works for other people as it did for me.

No trouble with the new drive works great. I didn't have any luck injecting folders in the program just had to export folders then on the new drive drag and drop folders. But my trouble is in viva pinata TIP saved games will transfer but game won't see them from what I have read on the issue witch is very limited this is normal. But has anyone seen or done this and have it work?
Would anyone be able to give a rough estimate of how likely a ban resulting from this would be. Does a save game treated this way appear as a hacked save game or something? Or does it end up the same way as if I had transferred it with a memory card?
not very likely, they would have to be looking for it, all it does it make the save think it is native, so unless you are editing the save game to do impossible things they probably will never notice. Even if you got caught it probably wouldnt be a perm ban or a system ban, probably just a temp live ban from that game.
I havnt seen any reports of people being banned for this. and i wasnt/havnt been
Hi,
Thanks for the effort put in making the thread and helping us not so clever when it breaks.
I have formatted the drive and everything, quite easily again thanks to the guide.
But upon plugging it back in the drive is read with 220gb free but is showing up as empty.
I backed up partition 2 and used the options to restore it on the new hdd. But its partition 3 I think I'm struggling with.
Could you please go in to a bit more detail on how to "dump" the content folder. Is that the only one I need to put on the new one? The old drive had things like titleupdate but the new one just has content. Is that right?
The way I did it was to drag and drop from xplorer 250gb in to a windows explorer window and then "inject" that folder back in...
Any idea why it isn't showing any of my data?
If anyone could help I'd be extremely thankful.
Once again great guide![]()
than alot for the very helpfull guide![]()
i do have a question , is it possible to use a WD 320GB HDD and flash it with the 250GB firmware u have ? i cant find any 250GB where i live
in other words:
i mean convert a 320GB hdd to a 250GB HDD , as 250GB HDD's are not available
anyone know where i could find the original xbox emulator to copy onto this hard drive? i was thinking of just buying an empty case and this HDD for my 360 Arcade, but don't want to do that if i can't get the backwards compatibility.
I had the same problem which was fixed by turning off my UAC. To do this you:
1. Click the Start Menu.
2. Click on Control Panel.
3. Scroll down to User Accounts and click on it.
4. Now click Change User Account Control settings.
5. Scroll the slider down to "Never Notify Me When".
Now you should be able to drag and drop the desired folders onto your new hard drive and it should work. You may also need to pop the new 250gb drive into the xbox and format before it will work. If you do this make sure to turn your UAC controls back to default when you are done.
Also remember only use xplorer 250gb with the new drive.
