Easily update your Jtagged or RGH Xbox 360 to Kernel / Dashboard 14699 with XeBuild

[cncc]

please could you answer me

i have jtag falcon dashboard 2.0.13604.0 is there easy way to update for making borderland 2 and sleeping dog work

what is the risk if i did something wrong about update (your steps)

thanks waiting for reply

 

[InsaneNutter]

This way has always worked for me, i have had no problems playing the latest games with Dashlaunch installed. (ignores the games version checki).

If you do something wrong or something goes wrong then you will need to solder a usb nand flasher to your jtags motherboard to flash a working nand again.

 

[cncc]

that is awesome thanks but there is a problem

its written in text file
---------------------
at time of this writing, this is ONLY compatible with:
jtag : 9199, 12611, 12625, 13146, 13599, 13604, 14699, 14717, 14719, 15574
glitch : 13599, 13604, 14699, 14717, 14719, 15574
glitch2: 14717, 14719, 15574 (trinity will show up as glitch2)
--------------------
my dashboard is 2.0.13604.0


just a question how to install? is it just copying all files and paste it on internal hdd by XEX or FSD

btw why reply with quote not working ? i mean after i submit message with quote they send me another link to type captcha then a message forum about denying my reply

waiting for reply and thanks

 

[cncc]

i got this message when i start dashlauch

"DachLaunch version does not match. Currently running V2.25. Do you want to update?"

board:falcon
flash:falcon
type:jtag
kernel:2.0.13604.0

should i update or cancel ? can i player borderland 2 if i choose cancel ?

 

[InsaneNutter]

Follow the tutorial on the first page of this thread and flash the updated nand, after you have done that just update your dashlaunch.

 

[cncc]

damn that is totally take long time :_(

anyway what is average time to update my jtag ?

 

[cncc]

i have done the update now i got xbox logo in the begining freezing ..... what is the problem ?

please help me totally frustrated

i can press home button

 

[cncc]

should i use my origin_nand.bin to reflash by xell?

---------
i did this useless method by xell flash orgin nand dumped then i got e71 wish i didnt update my jtag

still xell is working

i guess now i need orginal nand but where can i get it from ?? is it the same as the dumped one ?

now what should i do ??

sorry for many post hope you dont get annoyed by me :/
still i took some picture and video about my installing i will upload it here if you need

i dont think i did anything wrong but there is 1 bad block in nandflasher xbox that makes me doubt it , but you didnt mention about how danger is bad block is if im wrong correct me

again sorry for long reply and reall appericiate your hard work here

waiting your reply

 

[InsaneNutter]

Its not a "useless method" I even warned you of the risk if you didn't follow the tutorial to the letter, from what your saying i imagine you haven't as you don't appear to understand what you have done.

The "orginal nand" can only be obtained before jtagging your console, so if you dont have it you never will.
However if you have your dumped nand you can follow this tutorial and make an updated nand.

Or you can rename this to updflash.bin, put it on a usb memory stick and Xell will flash the backup nand back so your console will be how it was before you did anything.

 

[cncc]

i didnt mean your tutorial is useless so dont understand me wrong i just said my method is useless also what is the mitsake i have done ?? i read it many time your tutorial

sorry i really dont have orginal nand what i should now ?

 

[cncc]

also the freezing xbox logo what is cause ??

 

[InsaneNutter]

Try removing the hard drive and let me know if the Xbox still freezes at that logo then.

 

[cncc]

freezes to xbox logo but i can press home button but its glitchy , do you want a video ?

i removed hdd and controlers

 

[cncc]

hope you answer me quick :/

 

[InsaneNutter]

I'm not sure why its freezing there off the top of my head, flash your backed up nand back in Xell.

If that works fine then create your updated nand again and flash with the Nand Flasher 360 application and not from Xell.

 

[cncc]

I'm not sure why its freezing there off the top of my head, flash your backed up nand back in Xell.

If that works fine then create your updated nand again and flash with the Nand Flasher 360 application and not from Xell.

i already did then i got e71 error ,i guess its all about bad blocks if im not mistaken

also there is something i dont get it why the update file only 16 mb ??? is metro dash this size ? and how does the update work ?

and when you become available online ?

this is totally bad hope there is way to fix


im waiting for your reply

 

[InsaneNutter]

I think it will be about the bad blocks, NandFlasher 360 is good at remapping them which is why i tell people to use that.

A lot of 360's only have 16mb of onboard storage (nand) everything else such as the kinect data / avatars are kept on the hard drive / storage device.

Can you still use Xell? not then you will need to purchase a usb nand flasher.

 

[cncc]

yes i can use xell but i dont know how to connect to pc i tried but failed also i try search about connecting xell to pc but no luck

what about jrunner ?

sorry for late reply

 

[InsaneNutter]

Try this: xeBuild GUI 2.071b - Gui to Build 15574 dashboard for Jtag / RGH Consoles

1. Open your nand dump that you baked up before doing anything
2. Enter the CPU Key
3. Build Nand
4. Flash Nand with Xell
5. Hopefully everything is good

 

[cncc]

i got this after building

***** WARNING: naddump.bin has a bad LBA at block 0x1a8 (raw offset 0x6d5000), block LBA ignored

im going to copy and flash it now then i ll let you know