Easily update your Jtagged or RGH Xbox 360 to Kernel / Dashboard 14699 with XeBuild

blank cpu key

InsaneNutter said:
Nand built and sent via PM.



Try Xell Launch:

https://digiex.net/downloads/downlo...hdmi-support-quickboot-shortcut-download.html

You should be able to get your CPU key from that.
Click to expand...

try to launch xell via eject, black screen... then xell launch via fsd,still black screen... in dashlaunch 3.02 system info, you can see CPU KEY section, but without any characters. BLANK. just like in the DVD Key line. and when you go to NAND FLASH 360, CONSOLE REVISION says " UNKNOWN ​" with nand size of 16mb....
 
i tried eject but leaves me black screen.. tried also xell launch via fsd, but still, black screen.. when I look my cpu key via dashlaunch 3.02, I can see the CPU KEY section. but without characters. BLANK. same goes to DVD KEY line. and according to dashlaunch system info, I have a RGH2 slim. and in NANDFLASHER 360, it says I have " UNKNOWN " console ​with 16mb nand size.
 
it launch... =) thanks to your xell launch insanenutter... now that I have my CPU KEY, is it safe for me to flash my SLIM RGH2 regardless of the problems my xbox 360 have????
 
I have followed this and it works great. The question I have is I have a Jtag with the old xell and I wanted to know how to update to xell reloaded from this update. Yes I am a noob to all of this my Jtag knowledge is about two days of reading. I did my Jtag myself two days ago. Any help would be appreciated.
 
vegatooth said:
it launch... =) thanks to your xell launch insanenutter... now that I have my CPU KEY, is it safe for me to flash my SLIM RGH2 regardless of the problems my xbox 360 have????
Click to expand...

To be honest i couldn't say, as you have an RGH2 use this app here to build your update: https://digiex.net/downloads/downlo...-build-15574-dashboard-jtag-rgh-consoles.html

This tutorial uses applications that pre date the RGH2 so i cant honestly say if it will work or not as i only have a Jtag.

I dont see any reason why the nand builder i linked to above will not work however.


GMAN1283 said:
I have followed this and it works great. The question I have is I have a Jtag with the old xell and I wanted to know how to update to xell reloaded from this update. Yes I am a noob to all of this my Jtag knowledge is about two days of reading. I did my Jtag myself two days ago. Any help would be appreciated.
Click to expand...

Update to 15774 with XeBuild: https://digiex.net/downloads/downlo...-build-15574-dashboard-jtag-rgh-consoles.html and select Xell Reloaded from in there.

xeBuild GUI is the easier way to update now, i will be doing a new tutorial based on that once the fall 2012 dash update is released.
 
I am getting this error message when updating

**** could not read smc_config.bin (-1) ****

******* ERROR: critical bootloader files are missing, cannot proceed!



***** FATAL BUILD ERROR: -1 unable to complete NAND image

I might be missing something but I have got multiple copies of my nand from my console and they all seem to fail.
 
Help! I did everything but at the end when I try to start my xbox up it starts up but it's just black screen and controller doesn't connect to xbox (the xbox button just blinks - flashes or how can I say).
PS. opening tray does work
 
If you power the console on with the DVD tray do you get Xell? (might need to use the component cables depending on your version of Xell).
 
However if I'm just wasting your time I can drive my xbox to a service and they will fix it (hope they could).
 
Unfortunately there is nothing much you can do without opening the Xbox up and soldering a USB nand flasher to the console to re flash the nand. The best thing to do would be to take it to the person who modified the console.
 
Can this same method be used to update to 16197 ? I am currently on 12611. I have built a 14699 image here but i was wondering if i can jump straight to 16197 with the new xebuild 1.05?
 
thekow said:
Can this same method be used to update to 16197 ? I am currently on 12611. I have built a 14699 image here but i was wondering if i can jump straight to 16197 with the new xebuild 1.05?
Click to expand...

Yes you can, i did exactly the process here to update to 16197 and it worked perfectly.

I do plan to update the tutorial, i've just not had much free time to do so lately!
 
I will let you know how i go. I haven't flashed my nand for about 1.5 years .. I bearly remember how to do it. Can you look at my nand to see if its looks like it will work ? I will PM you a xebuild log?
 
thekow said:
I will let you know how i go. I haven't flashed my nand for about 1.5 years .. I bearly remember how to do it. Can you look at my nand to see if its looks like it will work ? I will PM you a xebuild log?
Click to expand...
nevermind it work perfectly thanks heaps
 
I keep getting the warning cfldv was not set anywhere then it says smc.bin was not found do you know what I'm doing wrong?
 
Probably means your nanddump is not in the my data folder, or if it is that it's named incorrectly.

Some screenshots of your my data folder / xebuild error messages would be of help.
 
Hi, this is my first time that i'm upgrading the dash. I have slim 4Gb Xbox 360. i tried following this tut but i got stuck. I used nand flasher but it doesn't show my console revison, the Nand size is 16MB. And I don't even if its Jtagged or RGH. How Do I find out? please Help! :)
 
Last edited:
You must log in or register to reply here.

About Digiex

Digiex is a technology and gaming forum, founded in 2004 by InsaneNutter and Nimrod. Digiex has served the internet community with breaking news, detailed guides, exclusive downloads and a popular discussion forum. A small, friendly community of like‑minded people has developed over the years. People are encouraged to register and participate in on‑going discussions.

Get Social

Back
Top Bottom