Easily update your Jtagged Xbox 360 to Kernel / Dashboard 12611 with FbBuild 0.11

Discussion in 'Xbox 360 Guides' started by InsaneNutter, Nov 12, 2010.

  1. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    11,580
    Likes Received:
    3,459
    Location:
    Yorkshire, England
    Thats likely a bad block, you should be able to extract the files you need out the nand fine though.

    I think you will also need to remap the bad blocks after creating your 12611 nand, i'm honestly not 100% about that though as the two consoles I have Jtagged myself have not had bad blocks. Hopefully someone reading this can give you a better answer.


    If the console doesn't boot to flash via USB you need to open the 360 up and connect a USB programmer up to the 360's motherboard.
     
  2. Moorfrost

    Moorfrost Member

    Joined:
    Nov 13, 2010
    Messages:
    12
    Likes Received:
    0
    Got that, have a nandx, just wondering about how to make that hacked 12611. Can freeboot toolbox maker just make that for me? Then flashing this via usb is the same procedure as when I first put xell and whatnot on there?
     
  3. InsaneNutter

    InsaneNutter Resident Nutter Staff Member

    Joined:
    Jun 1, 2007
    Messages:
    11,580
    Likes Received:
    3,459
    Location:
    Yorkshire, England
    Yup you got it, Its same thing just with a newer version of FreeBoot.

    FreeBoot toolbox basically automates the process you go though in this guide, good luck.
     
  4. Moorfrost

    Moorfrost Member

    Joined:
    Nov 13, 2010
    Messages:
    12
    Likes Received:
    0
    Yay! Thanx a million, I'll give it a shot when I have time.
     
  5. jer4251

    jer4251 New Member

    Joined:
    Nov 15, 2010
    Messages:
    4
    Likes Received:
    0
    i did this and my xbox won't boot back up either. wont connect to the controller, wont boot into xell. its a xenon 360, i had 9199 on it.

    where do i begin to fix my xbox?

    thanks
     
  6. Moorfrost

    Moorfrost Member

    Joined:
    Nov 13, 2010
    Messages:
    12
    Likes Received:
    0
    You're in the same boat as me, save I have a falcon. You're going to have to flash via usb or lpt with a new version, I'm going to have freeboot toolbox maker make mine since that is what I used to go from 7371 to 9199 and it did the trick. This time I'll just have to use the steps I did with the initial flash but use this image from freeboot toolbox maker, at least this is what I have gathered from InsaneNutter.

    Edit: With freeboot toolbox maker do I select creating custom freeboot and or make the filename destination freeboot.bin if I am going to be flashing via usb?
     
    Last edited: Nov 15, 2010
  7. jer4251

    jer4251 New Member

    Joined:
    Nov 15, 2010
    Messages:
    4
    Likes Received:
    0
    i'll try and reflash with lpt tomorrow, but where am i going to get a good file from? I was pretty sure the file i used was the correct file. Just hope i can get it fixed.
     
  8. Moorfrost

    Moorfrost Member

    Joined:
    Nov 13, 2010
    Messages:
    12
    Likes Received:
    0
    Was just looking through the files I used to jtag mine and saw that I used Jtag tool, on a hunch I checked to see if coolshrimp updated the tool for 12611 and he has. I'm going to try this and see if this works. Here's the link: http://www.megaupload.com/?d=NWN4HQG2
     
    Last edited: Nov 15, 2010
  9. jer4251

    jer4251 New Member

    Joined:
    Nov 15, 2010
    Messages:
    4
    Likes Received:
    0
    i tried downloadign this 2 times earlier, kept stopping at 55%

    now it quit at 30% maybe ive reached my limit for the day???
     
  10. Moorfrost

    Moorfrost Member

    Joined:
    Nov 13, 2010
    Messages:
    12
    Likes Received:
    0
    Is this an instance when I would choose to repair a bad nand, since I have a dump from when it was at 7371 and not jtagged?
     
  11. Ajie Prahasto

    Ajie Prahasto Member

    Joined:
    Nov 2, 2010
    Messages:
    13
    Likes Received:
    0
    Location:
    Indonesia, palangkaraya
    to InsaneNutter: Big Hug and thanks for the tutorial. ive done it.... sorry cant give u any screenshot (on the way).

    now i have more question.

    my newly re-flashed JTAG wont play any of these game: Tom Clancy-H.A.W.K, and FAble 3...it says "can't read dvd" but if i played it on my jasper arcade those two game play well.... how to solve these .....

    need more help
     
  12. Gundala

    Gundala New Member

    Joined:
    Nov 15, 2010
    Messages:
    1
    Likes Received:
    0
    Thanks InsaneNutter, your tutorial is very clear and easy to follow.
     
  13. MasterChief

    MasterChief Addict

    Joined:
    Sep 17, 2009
    Messages:
    743
    Likes Received:
    88
    Location:
    The Internet
    The name should not matter when doing it with a usb nand reader.
     
  14. MasterChief

    MasterChief Addict

    Joined:
    Sep 17, 2009
    Messages:
    743
    Likes Received:
    88
    Location:
    The Internet
    Its likely do to with the new AP2.5 protection, using the latest dashlaunch should let you play them from the hard drive if converted to Games on Demand containers. This thread is not about getting games to work, maybe start a new one?
     
  15. Justin Mckinnon

    Justin Mckinnon New Member

    Joined:
    Nov 15, 2010
    Messages:
    1
    Likes Received:
    0
    I've tried using my origional nand and my xbr.bin to get the smc/kv, tried flashing with lpt, updflash.bin in xell, and flash360 from freeboot dashboard with no luck. It prevents xell from booting and either gives me a black screen or 3rod when I power on my xenon.
     
  16. Moorfrost

    Moorfrost Member

    Joined:
    Nov 13, 2010
    Messages:
    12
    Likes Received:
    0
    So do I pretend I'm flashing it for the first time and go through all the steps with jtag tool or do I just put xell on it and flash it through xell with the file from freeboot toolbox maker?
     
  17. Bryan Johansen

    Bryan Johansen New Member

    Joined:
    Nov 15, 2010
    Messages:
    1
    Likes Received:
    0
    Wtf

    I Did this and Now my xbox wont turn on...ive done the power cycle...why is it allways me that has the problems.
     
  18. Moorfrost

    Moorfrost Member

    Joined:
    Nov 13, 2010
    Messages:
    12
    Likes Received:
    0
    Happened to me too, trying to figure out what to do as well.

    Edit: Here's my plan. I can't get into xell so I'm going to hook up my nand-x and flash xell back on there with jtag tool 2.20. Then I am going to use my 9199 jtag backup from 360 flash and use that to create an image with freeboot toolbox maker for my falcon using the cpu key I saved off from my initial jtagging and then boot into xell and apply that via usb drive. Should I use the 9199 jtag backup or should I use the 7371 prejtag image with freeboot toolbox maker?
     
  19. WunSick

    WunSick New Member

    Joined:
    Nov 16, 2010
    Messages:
    2
    Likes Received:
    0
    Important Notes:
    Falcon 16mb
    USB NandX + jtag Connection (330ohm setting (works with XBR3), 470ohm E79s)

    Followed this tutorial...

    I even tried 2.20 of CoolShrimp's jtag tool... Same exact result... no video. I can flash my original bin and it boots. I can flash XBR3, and it boots fine. But I cannot for the life of me get the new dash going. Always boots with no video. I dont get any error screen, no red lights, no green led animation for that matter either. Just sits there with center green light. Anybody got any advice? Please.
     
  20. WunSick

    WunSick New Member

    Joined:
    Nov 16, 2010
    Messages:
    2
    Likes Received:
    0
    Used 360 Flash Tool to extract the smc_dec.bin from my XBR image (instead of my original.bin image) and rebuilt. Works like a charm.
     

Share This Page